Cell: (412) 760-2948
Email: Erik.Atman@pepincpower.com
Dead-end Silicone Polymer Insulators 15 kV – 46 kV
Line Post Silicone Polymer Insulators 15 kV – 46 kV
Station Post Silicone Polymer Insulators 7.5 kV – 36 kV
Silicone Polymer Cutouts: 15 kV, 27 kV, & 36 kV Load break & Non-Load break
Distribution Transformers and Transformer Components<>Complies with all applicable ANSI and RUS Standards
Single Phase Pole Mount Step Transformer——25 kVA to 50 kVA
Single Phase Pole Mount Transformer————-1/2 kVA to 250 kVA
Single Phase Pad Mount Transformer————–5 kVA to 250 kVA
Single Phase Submersible Transformer———–15 kVA to 167 kVA
Three Phase Pad Mount Transformer————–30 kVA to 3000 kVA
Three Phase Pole Mount Rectangle—————-30 kVA to 300 kVA
Three Phase Pole Mount Round Tank————-30 kVA to 150 kVA
_______________________________________
5 – 167 kVA Circuit Breakers for Distribution Transformer —- Low Voltage Pole mount Bushings
ECI Breaker Accessories and Related Equipment ————– High Voltage Bushing Well
Terminal Board & Bushing Mount Expulsion Fuses ———— 200 AMP,35 kV Integrated Bushing
Bayonet Type Expulsion Fuses for Distribution Transformer- Low Voltage Stud Bushing
Dry-well Fuse holders for Current-limiting Fuses —————– Eco-Pad
ECI Arrester for Distribution Transformer ————————– Anti-Tracking Kit
Arrester Disconnect Switch ——————————————– Wildlife Protection Products
Full lifecycle supervision of asset management services that empowers utilities to proactively care for and increase the lifespan of utilities power delivery assets.
— Transmission Pole Inspection, Repair, and Distribution (wood, fiberglass, ductile, iron, steel, and concrete)
— Distribution (concrete/steel/wood/fiberglass/ductile/iron)
— Substation (steel/wood)
— Electrical Components
— Industrial NDT Services
— Corrosion Inspection
— Steel Pole/Steel Tower Coating Inspection and Repair
Kaddas Enterprises, Inc. is the Industry Leader in Wildlife and Asset Protection ~ They manufacture more than 280 products used by Power Utility companies around the globe to mitigate wildlife caused power outages for Substation, Distribution & Transmission equipment. Best of Class products, installation and training support is available. The Kaddas products are effective, efficient and extremely durable in all weather conditions. Meet IEEE 1656-2010 specifications.
Covers include the following:
Arresters Dead Ends Specialty Designs
Bolts Line Protector Substation Application
Bushings Pole Caps Anti Nest
Cutouts Recloser Anti Perch
-Overhead Sensors– Medium voltage current and/or voltage sensing contained within a fully mechanical rated post insulator. Now offers 0.5 % voltage accuracy.
-Underground Sensors– Medium voltage current and voltage sensing contained in a load-break or tee-body underground component. Now offers 0.5 % voltage accuracy.
-Transmission Line Monitoring– The TLM monitor provide complete picture of transmission conductor behavior in real time including actual conductor clearance-to-ground (not sag), conductor temperature, line current, and vibration measurement.
-Hardware, Fittings and Assembles for all Transmission voltage classes.
-Emergency Restoration System (ERS) for use during Natural Disasters or Planned Outages.
Leader in manufacturing of bare Aluminum Conductors for transmission and distribution of electrical power. Midal is capable of, producing the follow conductors:
–AAAC -All Aluminum Alloy Conductor
–AAC – All Aluminum Conductor
–AACSR – Aluminum Alloy Conductor Steel Reinforced
–ACAR – Aluminum Conductor Alloy Reinforced
–ACSR – Aluminum Conductor Steel Reinforced
–ACSR/AS – Aluminum Conductor Aluminum Clad Steel Reinforced
–ACSR/TW – Aluminum Conductor Shaped Wire Steel Reinforced
–ACSS/AS – Aluminum Conductor Aluminum Clad Steel Supported
-High Thermal and HTLS Conductors
-Special Alloy Conductors
Composite Fiber Optic Overhead Ground Wire (OPGW) using Aluminum Clad Steel
Fiber count ranging from 24 to 144 strands depending on cable design.
TrueWave fiber is available
Nucor is a producer of various tubular steel products for use in utility Transmission, Distribution and Substation applications.
– Transmission poles are monopoles, H-Frame or even Y-Frame design. Summit can form single piece tube sections up to 60 feet in length.
– Distribution poles of varying sizes can be produced with a galvanized, weathering, dulled or painted finish.
– Substation structures include both tapered tubular and standard shape designs. This includes CCVT stands and up to 500kV multi-bay A-Frames.
– Davit Arms and Cross Arms can be either bolt on or clamp on design and available for both steel and wood structures. Available in galvanized, weathering or painted finish.
TSEA has over 55 years of experience manufacturing products in Generation, Transmission and Distribution of energy, that are utilized in over 40 countries.
— Voltage Regulators up to 34.5kV
— Power Transformers up to 550MVA
— Industrial, Phase Shift, & Mobile Substation Transformers up to 138kV
